Draeger Fabius GS Anesthesia Service Manual
- Title
- Draeger Fabius GS Anesthesia Service Manual
- Make
- Draeger
- Model
- Fabius GS
- Document type
- Service
- Equipment type
- Anesthesia
Sign up free to view this manual
Already have an account? Log in
Shops searching for a Drager Fabius GS service manual usually have a workstation that failed a leak test, a ventilator check, or an oxygen reading the clinician does not trust. The library title is Draeger Fabius GS Anesthesia Service Manual. Draeger is the spelling on that record. Clinics also write Dräger or Drager. It is an anesthesia workstation, not a laser and not a monitor with a gas blender bolted on.
A service manual for this class of machine is the document you open when the pre-use checklist will not pass and the front panel has already told you everything it is going to tell you. Expect chapters on the breathing system, the ventilator, fresh-gas plumbing, the vaporizer interface and interlock, the electrical supply and battery, and the alarms that sit on those assemblies. Parts identification is in there so you are not ordering from a phone photo of a fitting. Calibration sections cover the sensors and valves a shop is allowed to adjust. They are not a suggestion to redesign the gas path.
On a preventive maintenance visit the work is repetitive and it should stay that way. A system leak test, ventilator volume and pressure checks, oxygen-monitor verification, vaporizer exclusion, scavenger function, battery condition, and electrical safety (protective earth and leakage current) are the usual list. Write down the numbers. A pass/fail sticker with no leak rate and no analyzer reading is hard to defend six months later when the facility asks what was actually measured.
Use the manual after you have the complaint in the clinician’s words, the serial number, and the hardware or software revision from the machine. Match the procedure to that revision. If a step says to replace an assembly and the room is still on the schedule, stop and confirm parts and downtime before you open the breathing system. Do not defeat an alarm to finish a case, and do not return a machine that failed its leak test.
A service company uses this document three ways: to run the PM the facility contracted, to isolate a fault far enough to order the right part, and to name the test equipment and the result in the service report. The notes on this page are ours. They are not the manual, and they do not quote its text, tables, or drawings. The file itself opens after you sign up.