UroView 2800 Service Manual
- Title
- UroView 2800 Service Manual
- Make
- UroView
- Model
- 2800
- Document type
- Service
- Equipment type
- Urology C-arm
Sign up free to view this manual
Already have an account? Log in
A UroView 2800 service manual is the document for this urology fluoroscopy system. The library title is UroView 2800 Service Manual. Treat it as an X-ray device that happens to be shaped like a C-arm for endourology, not as a generic mobile C-arm and not as a laser lithotripter. Cases are often ureteroscopy and similar stone work. The room may also contain a holmium laser. The laser is a different machine with a different manual.
Service documentation for a system like this typically covers the X-ray generator, the imaging chain (image intensifier or detector, camera, and monitor), collimation, exposure control, and the C geometry: brakes, locks, and counterbalance. Cables and high-voltage connections are part of the job. So is the table interface when the C-arm is sold with a urology table. Identify the exact configuration on the data plate before you order a detector part or a collimator assembly.
Mechanical checks matter as much as the image. A C that drifts, a brake that does not hold, or a lock that looks engaged and is not, is a clinical hazard over a sterile field. Check travel and locks at the positions the room actually uses. Then look at the image: collimation, orientation, and whether the monitor shows what the procedure says it should show. Do not generate X-rays to “see if it wakes up” without the facility’s radiation rules, monitoring if your role requires it, and a measurement method the service procedure specifies.
Electrical safety still applies to the system. Record generator technique only if you were supposed to expose, and record any radiation or image measurement the procedure asks for, with the meter identity and calibration due date. If you did not expose, say that you did not. A blank “fluoro OK” line is not a result.
A service company uses the manual to separate a generator fault from a mechanical fault and to name the assembly before it is ordered. These notes are original. They are not the OEM procedure and they do not include technique charts. Sign up to view the file.